LHA-1400P+ Fully Automatic Panel Bender for Complex Sheet Metal Parts
LHA-1400P+ INTELLIGENT FLEXIBLE PANEL BENDER
Precision bending, self-corrected in real time.
The LHA-1400P+ pairs universal tooling with a 15-axis all-servo control system that senses material variation and compensates automatically — so every bend holds the same angle, part after part.
|
100% In-House Core Technology |
0.35 mm Minimum material thickness |
±0.1 mm/m Dimensional accuracy |
1 yr Full-machine warranty |
01 Product Overview
Automatically Compensated, by Design
A multi-axis, all-servo concurrent control system works with load-offset detection and sheet-thickness sensing to continuously correct for variations in material and working conditions in real time.
The result: less waste, less rework, and a bending process that stays stable from the first part to the last — at low energy consumption, which helps contain operating costs across the range.
Lower Cost per Bend, Downstream Too
Because bend quality stays consistent over time, robotic welding, assembly, and finishing run faster — with fewer fixtures, less touch-up, and more stable cycle times.
Lower energy and consumables, shorter changeovers, and a reduced cost-per-bend, whether the job is high-mix/low-volume or a large production series.
02 Connected Manufacturing
Every LANHAO panel bender operates as part of an intelligent production environment — standalone, or fully networked.
|
ERP / MRP Integration Standalone benders integrate natively via software with upstream and downstream work centers, exchanging real-time data with your factory ERP/MRP system. |
Cloud O&M Platform Monitor equipment status in real time from a cloud-based operations and maintenance platform, with full, customizable oversight of production. |
Robotic-Arm Ready Pair with self-driven robotic arms to sequence loading, handling, and bending — supporting lights-out, reduced-labor, just-in-time operation. |
03 Technical Parameters
Specifications below are for the LHA-1400P+ model.
CAPACITY & DIMENSIONS
|
Parameter |
Specification |
Remarks |
|
Worktable Height |
975 mm ± 15 mm |
|
|
Maximum Bending Length |
1400 mm |
|
|
Maximum Bending Size |
Length 1400 mm × Width 1400 mm |
|
|
Maximum Bending Height |
170 mm |
|
|
Machine Size |
Approx. L468 × W199 × H291 cm |
|
|
Total Weight |
Approx. 12 tons |
|
MATERIAL & FORMING
|
Parameter |
Specification |
Remarks |
|
Maximum Bending Thickness |
Mild carbon steel (δb ≤ 410 MPa), 3.0 mm |
Standard tool, one 90° bend; sheet complies with national standard |
|
Minimum Material Thickness |
0.35 mm |
|
|
Min. Inner Size, Four-Side Forming |
Approx. 160 mm × 200 mm |
Excluding hinge blade size |
|
Min. Inner Size, Two-Side Forming |
Approx. 160 mm |
|
|
Bending Angle Range |
0°–180° |
|
|
Minimum Bending Height |
Approx. 5 mm |
Based on test results of one 90° bend on 1.0 mm cold-rolled sheet |
|
Ratio of Inner Bend Radius R to Plate Thickness t |
Approx. 0.8–1.2 |
CONTROL & UTILITIES
|
Parameter |
Specification |
Remarks |
|
Number of Servo Axes |
15 |
|
|
Angle Accuracy |
Approx. ±0.5°/m |
Based on test results of one 90° bend on 1.0 mm cold-rolled sheet |
|
Dimensional Accuracy |
Approx. ±0.1 mm/m |
|
|
Rated Voltage |
380 V |
|
|
Air Supply Pressure |
0.7 MPa |
|
04 Manufacturer
Nanjing Lanhao Intelligent Technology Co., Ltd. is a high-tech enterprise integrating product R&D, functional customization, manufacturing, and after-sales service — developing panel benders, self-propelled integrated robotic arms, multi-axis concurrent-linkage control systems, and cloud O&M platforms.
Every core system is developed in-house: operating software, control circuitry, mechanical structure, and bending tooling. LANHAO was the first independent brand to commercialize flexible bending centers in China — filling a gap in the domestic panel bender industry, with Industry 4.0 at the center of its roadmap.
|
100% In-house manufacturer |
1st Independent flexible-bending brand in China |
30 min From Nanjing Lukou Airport |
05 FAQ
Are you a factory or a trading company?
We are a reputable manufacturer — every LANHAO panel bender is designed, built, and tested in our own facility.
Where is your company located?
Our factory is located in Nanjing, Jiangsu Province, providing convenient access for visitors. Feel free to visit our facility — we can arrange transportation from Nanjing Lukou Airport, which is only a 30-minute drive away.
What is the warranty period for your machines?
After the equipment is checked and accepted, the quality guarantee period for the whole machine is one year.
Does your company provide training?
We offer on-site training at our facility and remote training options for your convenience, so your personnel are well-versed in operating our machines effectively.
How difficult is it to operate your panel benders?
Our panel benders are designed to be user-friendly, with an intuitive, straightforward operating interface. We also provide detailed operation manuals and training so customers can quickly get comfortable running the equipment correctly.
